How do I view or check my electricity bill online?

Select your state and DISCOM above to access your official utility portal. You will need your utility consumer identifier, such as a 10-digit Account ID (UPPCL, BESCOM), 12-digit Consumer Number and 4-digit Billing Unit (Mahavitaran), CA Number (BSES, TPDDL), or Consumer Service Number (TANGEDCO).

Can I pay my electricity bill directly on BijliWise?

No. BijliWise is strictly an independent consumer intelligence and statutory audit platform. We never collect bill payments, process financial transactions, or ask for passwords, OTPs, or UPI PINs. Always pay directly through your DISCOM's official SSL portal or authorized Bharat BillPay (BBPS) channels.

Why does my billed electricity amount differ from the pure unit rate?

Electricity bills include state-mandated fixed/demand charges per kW, telescopic progressive energy slab rates, wheeling charges, state electricity duty (5% to 16%), and Fuel Adjustment Charges (FAC/FPPCA/PPAC) that fluctuate dynamically.

How do I know if my electricity meter is running too fast (Load Creep)?

Perform the 1-Hour Home Load Test: Turn off your main circuit breaker (MCB) inside the house. If the meter pulse LED continues blinking while the MCB is off, there is neutral leakage or meter creep. Next, turn on a single known 1000W load for exactly one hour; the meter should increment by exactly 1.0 kWh (plus or minus 2.5%).

How do I file a statutory complaint against an incorrect or inflated bill?

Under Section 42(5) of the Electricity Act 2003, register a formal complaint with your DISCOM's Sub-Divisional Officer (SDO) or call toll-free 1912. If unresolved within the statutory timeline (typically 7 to 15 days), escalate to the Consumer Grievance Redressal Forum (CGRF) and subsequently to the State Electricity Ombudsman.

Check Electricity Bill Online & Statutory Audit Hub

Access official state DISCOM portals to view, check, and download your electricity bill, plus instant statutory tariff slab auditing and high-bill diagnosis.

Quick Reference & Direct AnswerStatutory Navigation Hub

Direct Answer: To view, check, or download your current electricity bill online in India, you need your DISCOM-specific consumer identifier (e.g., 10-digit Account ID for UPPCL & BESCOM, 12-digit Consumer Number + BU for Mahavitaran/MSEDCL, CA Number for BSES Delhi & Tata Power, or Service Number for TNEB/TANGEDCO).

Audit First: Before paying via third-party payment gateways, verify your billed units using the statutory audit tool below to catch provisional reading estimations, incorrect meter multipliers, or erroneous fuel surcharge (FAC) calculations.

Official Action Gate & Bill Verification

Check & View Electricity Bill Online

Access official portals for Indian power distribution companies (DISCOMs). View your due amount, download payment receipts, and audit your bill where verified statutory tariffs are available.

Direct Official Action Gate

Top Utilities — Quick Bill Check & View Portals

1-Click Launch to Official Utility Portals

Uttar PradeshOfficial Utility Portal

UPPCL (UP Energy)

Uttar Pradesh Power Corp. Ltd.

Identifier: 10-Digit Account ID

Official domain: uppclonline.com

Open Official Portal

MaharashtraOfficial Utility Portal

Mahavitaran (MSEDCL)

Maharashtra State Electricity Distribution Co.

Identifier: 12-Digit Consumer No + BU

Official domain: wss.mahadiscom.in

Open Official Portal

KarnatakaOfficial Utility Portal

BESCOM (Bengaluru)

Bangalore Electricity Supply Co. Ltd.

Identifier: 10-Digit Account ID

Official domain: bescom.co.in

Open Official Portal

Tamil NaduOfficial Utility Portal

TANGEDCO / TNEB

Tamil Nadu Generation & Distribution Corp.

Identifier: Consumer Service Number

Official domain: tnebnet.org

Open Official Portal

West BengalOfficial Utility Portal

WBSEDCL (West Bengal)

West Bengal State Electricity Distribution Co.

Identifier: 9-Digit Consumer ID + Inst. No

Official domain: wbsedcl.in

Open Official Portal

DelhiOfficial Utility Portal

BSES Delhi (BRPL/BYPL)

BSES Rajdhani / Yamuna Power Ltd.

Identifier: 9-Digit CA Number

Official domain: bsesdelhi.com

Open Official Portal

1. Search or Select Your State & Power Utility (DISCOM)

Covers all 36 States & UTs with direct official deep-links

State / Union Territory

Distribution Company (DISCOM)

Official Utility Consumer GateOfficial Portal LinkDirect Bill View & Payment

Uttar Pradesh Power Corporation Ltd.

Regulated by UPERC • Official Domain: https://www.uppclonline.com

Open Official UPPCL Bill Pay Portal Utility Home

BijliWise Zero-Trap Guarantee:

BijliWise is an independent statutory consumer intelligence platform. We never ask for your account password, OTP, banking details, or UPI PIN. Clicking above redirects you directly to your DISCOM's official portal to view and pay your bill.

ℹ️

Consumer Safety Notice:

Be cautious with unexpected electricity-bill messages. BijliWise does not request OTPs, passwords, banking credentials, UPI PINs, or remote-access installation. For payment or account actions, use the official utility website/app linked above and verify the destination before entering any information.

Required Identifier10-Digit Account ID

10 digits (Urban) / 12 digits (Rural legacy)

Where to Find on Bill

Printed in bold on top-right of physical bill or in monthly SMS alert.

DISCOM Helpline1912

24x7 Billing Support

Step 2: Instant Bill Accuracy Audit

Verify Your Uttar Pradesh Billed Amount

View Full Uttar Pradesh Tariff Slabs ➔

Total Units Consumed (kWh)

Total Billed Amount on Utility Slip (₹)

Statutory Expected Amount

₹1,401.25

Verified Tariff Engine (UP SERC Domestic Order)

Billed vs Expected Variance

-₹1.25 Lower

Difference from utility slip

Run Deep 5-Point Anomaly Diagnosis ➔

Frequently Asked Questions (Electricity Bill Check & Verification)

How do I view my electricity bill without an account number?Most state DISCOMs (such as UPPCL, Mahadiscom, and TANGEDCO) allow you to retrieve your bill using your registered mobile number or meter number directly through their official consumer portal or mobile app.

Why does my online bill amount differ from the meter reading calculation?Electricity bills include state-specific fixed charges per kW, wheeling charges, electricity duty (5% to 16%), and Fuel Adjustment Charges (FAC/FPPCA) on top of pure energy slab rates. Use BijliWise's statutory audit tool above to verify each individual component.

What should I do if my electricity bill is unusually high?First perform the 1-Hour Home Load Test by switching off all circuit breakers to verify whether the meter LED pulse stops blinking. If the meter is accurate, check if seasonal AC usage or a higher progressive tariff slab was triggered using our Bill Anomaly Diagnostic Engine.

Intents 1 & 2: View Bill & Safe Payment

Official Bill Retrieval & Anti-Phishing Safety Notice

How to Access Your Official DISCOM Portal

Every state distribution company provides a dedicated Self-Care Portal (WSS/SCP) to view monthly energy consumption, download duplicate tax invoices, and verify security deposit interest.

Consumer Identifier: Enter your exact Account ID or CA Number as listed in our Credential Guide above.
Billing Unit (BU): Consumers under Mahavitaran must specify their 4-digit sub-division BU code alongside their 12-digit consumer number.
Duplicate Bill PDF: Always download the itemized statement showing meter serial number, current reading date, and tariff category code (e.g., LMV-1, LT-1).

Consumer Advisory: Unofficial SMS & Payment Safety

Electricity consumers across multiple states frequently report receiving deceptive SMS or WhatsApp messages claiming: “Dear Consumer, your power supply will be disconnected tonight because your previous bill is unpaid. Contact electricity officer at 98XXXXXX.”

Sender Identity Verification: Official DISCOM billing alerts are sent via registered enterprise SMS sender IDs (such as VK-UPPCL or VM-MSEDCL), not from personal 10-digit mobile numbers.
Never Install Remote Apps: Power utilities never instruct consumers to install screen-sharing software or APK packages (e.g. AnyDesk, TeamViewer) to update bills.
BijliWise Independence: BijliWise is strictly an independent consumer calculation platform and never accepts bill payments or asks for banking credentials. Pay only via official utility URLs or authorized Bharat BillPay (BBPS) outlets.

Intents 3 & 4: Verification & Wrong Bill Diagnosis

Why Does the Bill Amount Differ? 4-Step Wrong Bill Checklist

Before disputing an electricity bill, run this 4-step diagnostic to determine whether the deviation is statutory or an operational error by the meter reader.

Billing Cycle Days

Standard billing cycles are 30 days (or 60 days in Tamil Nadu and Kerala). If your meter reading was taken at 39 or 42 days, higher progressive slab rates apply unless pro-rated by your DISCOM.

Meter Status Code

Inspect the Status Code column on your bill. Codes like L (Door Lock), F (Faulty), or A (Average) indicate provisional estimates rather than actual meter readings.

Reading Arithmetic

Verify: Units = (Current Reading − Previous Reading) × Multiplying Factor. Transposition typos (e.g. entering 6920 instead of 6290) are the #1 cause of sudden 3x billing spikes.

Unbundled Surcharges

Fixed demand charges (₹/kW), wheeling charges, and Fuel Adjustment Charges (FAC/PPAC) can add 15% to 35% above the pure energy slab rate. Check our Universal Calculator for unbundled breakdowns.

Intent 5: Meter Issue & Fast Meter Testing

Is Your Electric Meter Running Too Fast? The 1-Hour Home Load Test

If your consumption jumped drastically with no change in lifestyle or appliances, your meter may suffer from neutral leakage or meter calibration creep. Follow the statutory self-test protocol below:

Part A: The No-Load Creep Test (Checking for Phantom Metering)

Locate your home's main Miniature Circuit Breaker (MCB) or Distribution Board and switch OFF the main breaker completely.
Walk to your electric utility meter outside your premises.
Observe the red pulse LED (calibrated with a rating such as 3200 imp/kWh or 1600 imp/kWh).
Pass Condition: The pulse LED must either stay continuously illuminated or remain completely dark. Under CEA regulations, an idle meter must NOT register more than one pulse under zero load.
Fail Condition: If the LED blinks repeatedly while all internal circuits are open, there is neutral current leakage in building wiring or internal meter clock malfunction.

Part B: The 1-Hour Single-Load Calibration Verification

Switch off all household appliances, refrigerators, inverters, and standby electronics.
Turn on a single appliance with an exact, known resistive rating — such as a standard 1,000-Watt (1.0 kW) electric room heater or water geyser.
Note down the exact decimal reading on your electronic meter display (e.g., 10452.3 kWh).
Run the 1,000-Watt appliance for exactly 60 minutes timed with a stopwatch, then turn it off immediately.
Read the meter again. For Class 1.0 residential meters, the reading must increment by exactly 1.00 kWh (±2.5% margin of statutory error). If it records 1.3 or 1.5 units, you have conclusive evidence of a fast meter.

Intent 6: Dispute Redressal Ladder

How to File a Formal Dispute: Statutory Escalation Under Section 42(5)

Every electricity consumer in India is protected by statutory dispute escalation frameworks enacted under the Electricity Act, 2003. If your DISCOM rejects your bill correction request, escalate through the 3 statutory tiers:

Level 1: DISCOM Internal

Sub-Divisional Officer (SDO) / 1912

Lodge an official grievance via toll-free national helpline 1912 or submit a written application to the Assistant Engineer (AE/SDO). Request an official Docket Number.

Statutory SLA: 7 to 15 Days

Level 2: Quasi-Judicial Forum

Consumer Grievance Redressal Forum (CGRF)

Established under Section 42(5) of the Electricity Act 2003. CGRF is an independent tribunal comprising technical and consumer representatives. The utility cannot disconnect power while a CGRF petition is pending if undisputed charges are paid.

Statutory Mandate: Resolution in 45-60 Days

Level 3: Regulatory Appellate

State Electricity Ombudsman

Appointed by your State Electricity Regulatory Commission (SERC). If the CGRF dismisses your petition or fails to pass an order within 60 days, file an appeal before the Ombudsman within 30 days of the CGRF decision.

Appellate Authority: Legally Binding Order

Related BijliWise Consumer Calculators & Audit Suites

Electricity Bill Calculator ➔

Simulate domestic electricity bills with verified SERC orders and provisional models across India.

Solar ROI & Net-Metering ➔

Calculate PM Surya Ghar subsidy eligibility, self-consumption savings, and realistic payback periods.

State Tariff Directory ➔

Browse regulatory orders and tariff schedules across all 36 Indian states and union territories.

Loading calculation engine...

Official Bill Retrieval & Anti-Phishing Safety Notice

How to Access Your Official DISCOM Portal

Every state distribution company provides a dedicated Self-Care Portal (WSS/SCP) to view monthly energy consumption, download duplicate tax invoices, and verify security deposit interest.

Consumer Identifier: Enter your exact Account ID or CA Number as listed in our Credential Guide above.
Billing Unit (BU): Consumers under Mahavitaran must specify their 4-digit sub-division BU code alongside their 12-digit consumer number.
Duplicate Bill PDF: Always download the itemized statement showing meter serial number, current reading date, and tariff category code (e.g., LMV-1, LT-1).

Consumer Advisory: Unofficial SMS & Payment Safety

Sender Identity Verification: Official DISCOM billing alerts are sent via registered enterprise SMS sender IDs (such as VK-UPPCL or VM-MSEDCL), not from personal 10-digit mobile numbers.
Never Install Remote Apps: Power utilities never instruct consumers to install screen-sharing software or APK packages (e.g. AnyDesk, TeamViewer) to update bills.
BijliWise Independence: BijliWise is strictly an independent consumer calculation platform and never accepts bill payments or asks for banking credentials. Pay only via official utility URLs or authorized Bharat BillPay (BBPS) outlets.

Why Does the Bill Amount Differ? 4-Step Wrong Bill Checklist

Before disputing an electricity bill, run this 4-step diagnostic to determine whether the deviation is statutory or an operational error by the meter reader.

Billing Cycle Days

Standard billing cycles are 30 days (or 60 days in Tamil Nadu and Kerala). If your meter reading was taken at 39 or 42 days, higher progressive slab rates apply unless pro-rated by your DISCOM.

Meter Status Code

Inspect the Status Code column on your bill. Codes like L (Door Lock), F (Faulty), or A (Average) indicate provisional estimates rather than actual meter readings.

Reading Arithmetic

Verify: Units = (Current Reading − Previous Reading) × Multiplying Factor. Transposition typos (e.g. entering 6920 instead of 6290) are the #1 cause of sudden 3x billing spikes.

Unbundled Surcharges

Fixed demand charges (₹/kW), wheeling charges, and Fuel Adjustment Charges (FAC/PPAC) can add 15% to 35% above the pure energy slab rate. Check our Universal Calculator for unbundled breakdowns.

Is Your Electric Meter Running Too Fast? The 1-Hour Home Load Test

If your consumption jumped drastically with no change in lifestyle or appliances, your meter may suffer from neutral leakage or meter calibration creep. Follow the statutory self-test protocol below:

Part A: The No-Load Creep Test (Checking for Phantom Metering)

Locate your home's main Miniature Circuit Breaker (MCB) or Distribution Board and switch OFF the main breaker completely.
Walk to your electric utility meter outside your premises.
Observe the red pulse LED (calibrated with a rating such as 3200 imp/kWh or 1600 imp/kWh).
Pass Condition: The pulse LED must either stay continuously illuminated or remain completely dark. Under CEA regulations, an idle meter must NOT register more than one pulse under zero load.
Fail Condition: If the LED blinks repeatedly while all internal circuits are open, there is neutral current leakage in building wiring or internal meter clock malfunction.

Part B: The 1-Hour Single-Load Calibration Verification

Switch off all household appliances, refrigerators, inverters, and standby electronics.
Turn on a single appliance with an exact, known resistive rating — such as a standard 1,000-Watt (1.0 kW) electric room heater or water geyser.
Note down the exact decimal reading on your electronic meter display (e.g., 10452.3 kWh).
Run the 1,000-Watt appliance for exactly 60 minutes timed with a stopwatch, then turn it off immediately.
Read the meter again. For Class 1.0 residential meters, the reading must increment by exactly 1.00 kWh (±2.5% margin of statutory error). If it records 1.3 or 1.5 units, you have conclusive evidence of a fast meter.

How to File a Formal Dispute: Statutory Escalation Under Section 42(5)

Level 1: DISCOM Internal

Sub-Divisional Officer (SDO) / 1912

Lodge an official grievance via toll-free national helpline 1912 or submit a written application to the Assistant Engineer (AE/SDO). Request an official Docket Number.

Statutory SLA: 7 to 15 Days

Level 2: Quasi-Judicial Forum

Consumer Grievance Redressal Forum (CGRF)

Statutory Mandate: Resolution in 45-60 Days

Level 3: Regulatory Appellate

State Electricity Ombudsman

Appellate Authority: Legally Binding Order