Check Electricity Bill Online & Statutory Audit Hub
Access official state DISCOM portals to view, check, and download your electricity bill, plus instant statutory tariff slab auditing and high-bill diagnosis.
Direct Answer: To view, check, or download your current electricity bill online in India, you need your DISCOM-specific consumer identifier (e.g., 10-digit Account ID for UPPCL & BESCOM, 12-digit Consumer Number + BU for Mahavitaran/MSEDCL, CA Number for BSES Delhi & Tata Power, or Service Number for TNEB/TANGEDCO).
Audit First: Before paying via third-party payment gateways, verify your billed units using the statutory audit tool below to catch provisional reading estimations, incorrect meter multipliers, or erroneous fuel surcharge (FAC) calculations.
Check & View Electricity Bill Online
Access official portals for Indian power distribution companies (DISCOMs). View your due amount, download payment receipts, and audit your bill where verified statutory tariffs are available.
Top Utilities — Quick Bill Check & View Portals
UPPCL (UP Energy)
Uttar Pradesh Power Corp. Ltd.
Mahavitaran (MSEDCL)
Maharashtra State Electricity Distribution Co.
BESCOM (Bengaluru)
Bangalore Electricity Supply Co. Ltd.
TANGEDCO / TNEB
Tamil Nadu Generation & Distribution Corp.
WBSEDCL (West Bengal)
West Bengal State Electricity Distribution Co.
BSES Delhi (BRPL/BYPL)
BSES Rajdhani / Yamuna Power Ltd.
1. Search or Select Your State & Power Utility (DISCOM)
Covers all 36 States & UTs with direct official deep-links
Uttar Pradesh Power Corporation Ltd.
Regulated by UPERC • Official Domain: https://www.uppclonline.com
BijliWise is an independent statutory consumer intelligence platform. We never ask for your account password, OTP, banking details, or UPI PIN. Clicking above redirects you directly to your DISCOM's official portal to view and pay your bill.
Be cautious with unexpected electricity-bill messages. BijliWise does not request OTPs, passwords, banking credentials, UPI PINs, or remote-access installation. For payment or account actions, use the official utility website/app linked above and verify the destination before entering any information.
10 digits (Urban) / 12 digits (Rural legacy)
Printed in bold on top-right of physical bill or in monthly SMS alert.
24x7 Billing Support
Verify Your Uttar Pradesh Billed Amount
Frequently Asked Questions (Electricity Bill Check & Verification)
Official Bill Retrieval & Anti-Phishing Safety Notice
How to Access Your Official DISCOM Portal
Every state distribution company provides a dedicated Self-Care Portal (WSS/SCP) to view monthly energy consumption, download duplicate tax invoices, and verify security deposit interest.
- Consumer Identifier: Enter your exact Account ID or CA Number as listed in our Credential Guide above.
- Billing Unit (BU): Consumers under Mahavitaran must specify their 4-digit sub-division BU code alongside their 12-digit consumer number.
- Duplicate Bill PDF: Always download the itemized statement showing meter serial number, current reading date, and tariff category code (e.g., LMV-1, LT-1).
Consumer Advisory: Unofficial SMS & Payment Safety
Electricity consumers across multiple states frequently report receiving deceptive SMS or WhatsApp messages claiming: “Dear Consumer, your power supply will be disconnected tonight because your previous bill is unpaid. Contact electricity officer at 98XXXXXX.”
- Sender Identity Verification: Official DISCOM billing alerts are sent via registered enterprise SMS sender IDs (such as
VK-UPPCLorVM-MSEDCL), not from personal 10-digit mobile numbers. - Never Install Remote Apps: Power utilities never instruct consumers to install screen-sharing software or APK packages (e.g. AnyDesk, TeamViewer) to update bills.
- BijliWise Independence: BijliWise is strictly an independent consumer calculation platform and never accepts bill payments or asks for banking credentials. Pay only via official utility URLs or authorized Bharat BillPay (BBPS) outlets.
Why Does the Bill Amount Differ? 4-Step Wrong Bill Checklist
Before disputing an electricity bill, run this 4-step diagnostic to determine whether the deviation is statutory or an operational error by the meter reader.
Billing Cycle Days
Standard billing cycles are 30 days (or 60 days in Tamil Nadu and Kerala). If your meter reading was taken at 39 or 42 days, higher progressive slab rates apply unless pro-rated by your DISCOM.
Meter Status Code
Inspect the Status Code column on your bill. Codes like L (Door Lock), F (Faulty), or A (Average) indicate provisional estimates rather than actual meter readings.
Reading Arithmetic
Verify: Units = (Current Reading − Previous Reading) × Multiplying Factor. Transposition typos (e.g. entering 6920 instead of 6290) are the #1 cause of sudden 3x billing spikes.
Unbundled Surcharges
Fixed demand charges (₹/kW), wheeling charges, and Fuel Adjustment Charges (FAC/PPAC) can add 15% to 35% above the pure energy slab rate. Check our Universal Calculator for unbundled breakdowns.
Is Your Electric Meter Running Too Fast? The 1-Hour Home Load Test
If your consumption jumped drastically with no change in lifestyle or appliances, your meter may suffer from neutral leakage or meter calibration creep. Follow the statutory self-test protocol below:
Part A: The No-Load Creep Test (Checking for Phantom Metering)
- Locate your home's main Miniature Circuit Breaker (MCB) or Distribution Board and switch OFF the main breaker completely.
- Walk to your electric utility meter outside your premises.
- Observe the red pulse LED (calibrated with a rating such as
3200 imp/kWhor1600 imp/kWh). - Pass Condition: The pulse LED must either stay continuously illuminated or remain completely dark. Under CEA regulations, an idle meter must NOT register more than one pulse under zero load.
- Fail Condition: If the LED blinks repeatedly while all internal circuits are open, there is neutral current leakage in building wiring or internal meter clock malfunction.
Part B: The 1-Hour Single-Load Calibration Verification
- Switch off all household appliances, refrigerators, inverters, and standby electronics.
- Turn on a single appliance with an exact, known resistive rating — such as a standard 1,000-Watt (1.0 kW) electric room heater or water geyser.
- Note down the exact decimal reading on your electronic meter display (e.g.,
10452.3 kWh). - Run the 1,000-Watt appliance for exactly 60 minutes timed with a stopwatch, then turn it off immediately.
- Read the meter again. For Class 1.0 residential meters, the reading must increment by exactly 1.00 kWh (±2.5% margin of statutory error). If it records 1.3 or 1.5 units, you have conclusive evidence of a fast meter.
How to File a Formal Dispute: Statutory Escalation Under Section 42(5)
Every electricity consumer in India is protected by statutory dispute escalation frameworks enacted under the Electricity Act, 2003. If your DISCOM rejects your bill correction request, escalate through the 3 statutory tiers:
Sub-Divisional Officer (SDO) / 1912
Lodge an official grievance via toll-free national helpline 1912 or submit a written application to the Assistant Engineer (AE/SDO). Request an official Docket Number.
Consumer Grievance Redressal Forum (CGRF)
Established under Section 42(5) of the Electricity Act 2003. CGRF is an independent tribunal comprising technical and consumer representatives. The utility cannot disconnect power while a CGRF petition is pending if undisputed charges are paid.
State Electricity Ombudsman
Appointed by your State Electricity Regulatory Commission (SERC). If the CGRF dismisses your petition or fails to pass an order within 60 days, file an appeal before the Ombudsman within 30 days of the CGRF decision.
Related BijliWise Consumer Calculators & Audit Suites
Simulate domestic electricity bills with verified SERC orders and provisional models across India.
Solar ROI & Net-Metering ➔Calculate PM Surya Ghar subsidy eligibility, self-consumption savings, and realistic payback periods.
State Tariff Directory ➔Browse regulatory orders and tariff schedules across all 36 Indian states and union territories.